example_dirtviz.cpp

Go to the documentation of this file.

 
#include <Arduino.h>
#include <WiFi.h>
 
#include "dirtviz.hpp"
 
#define SERIAL_BAUD 115200
 
const char ssid[] = "wifi-network-here";
const char pass[] = "wifi-password-here";
 
Dirtviz api("ip address here");
 
const char data[] = "message-here";
const size_t data_len = 21;
 
void setup() {
  // Start serial interface
  Serial.begin(115200);
  // Wait for serial connection
  while (!Serial) {
    delay(100);
  }
 
  Serial.print("SSID: ");
  Serial.println(ssid);
  Serial.print("Password: ");
  Serial.println(pass);
  Serial.print("Connecting");
 
  // Connect to WiFi network
  WiFi.begin(ssid, pass);
 
  // Wait for WiFi to connect
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
 
  Serial.println("");
  Serial.println("Connected!");
  Serial.println(WiFi.localIP());
}
 
void loop() {
  const uint8_t* resp_data;
  size_t resp_data_len;
 
  // Send example measurement
  api.SendMeasurement((const uint8_t*)data, data_len);
  HttpClient http_client = api.GetResponse();
  Serial.print("Response Code: ");
  Serial.println(http_client.ResponseCode());
 
  // Get response data
  Serial.println("Response:");
  Serial.println(http_client.Data().c_str());
 
  // wait 1s
  delay(1000);
}