transcoder.h

Go to the documentation of this file.

 
#ifndef PROTO_C_INCLUDE_TRANSCODER_H_
#define PROTO_C_INCLUDE_TRANSCODER_H_
 
#ifdef __cplusplus
extern "C" {
#endif
 
#include <stddef.h>
#include <string.h>
 
#include "controller.pb.h"
#include "measurements.pb.h"
#include "user_config.pb.h"
 
size_t EncodePowerMeasurement(uint32_t ts, uint32_t logger_id, uint32_t cell_id,
                              double voltage, double current, uint8_t* buffer);
 
size_t EncodePowerDeltaMeasurement(uint32_t ts, uint32_t logger_id,
                                   uint32_t cell_id, uint32_t voltage,
                                   uint32_t current, uint8_t* buffer);
 
size_t EncodeTeros12Measurement(uint32_t ts, uint32_t logger_id,
                                uint32_t cell_id, double vwc_raw,
                                double vwc_adj, double temp, uint32_t ec,
                                uint8_t* buffer);
 
size_t EncodeTeros21Measurement(uint32_t ts, uint32_t logger_id,
                                uint32_t cell_id, double matric_pot,
                                double temp, uint8_t* buffer);
 
size_t EncodePhytos31Measurement(uint32_t ts, uint32_t logger_id,
                                 uint32_t cell_id, double voltage,
                                 double leaf_wetness, uint8_t* buffer);
 
size_t EncodeBME280Measurement(uint32_t ts, uint32_t logger_id,
                               uint32_t cell_id, uint32_t pressure,
                               int32_t temperature, uint32_t humidity,
                               uint8_t* buffer);
 
size_t EncodeWaterPressMeasurement(uint32_t ts, uint32_t logger_id,
                                   uint32_t cell_id, double voltage,
                                   double water_pressure, uint8_t* buffer);
 
size_t EncodeSEN0308Measurement(uint32_t ts, uint32_t logger_id,
                                uint32_t cell_id, double voltage,
                                double humidity, uint8_t* buffer);
 
size_t EncodeWaterFlowMeasurement(uint32_t ts, uint32_t logger_id,
                                  uint32_t cell_id, double water_flow,
                                  uint8_t* buffer);
 
size_t EncodePCAP02Measurement(uint32_t ts, uint32_t logger_id,
                               uint32_t cell_id, double capacitance,
                               uint8_t* buffer);
 
int DecodeMeasurement(Measurement* meas, const uint8_t* buffer,
                      const size_t len);
 
Response_ResponseType DecodeResponse(const uint8_t* data, const size_t len);
 
Esp32Command DecodeEsp32Command(const uint8_t* data, const size_t len);
 
size_t EncodePageCommand(PageCommand_RequestType req, int fd, size_t bs,
                         size_t n, uint8_t* buffer, size_t size);
 
size_t EncodeTestCommand(TestCommand_ChangeState state, int32_t data,
                         uint8_t* buffer, size_t size);
 
size_t EncodeMicroSDCommand(const MicroSDCommand* microsd_cmd, uint8_t* buffer,
                            size_t size);
 
size_t EncodeWiFiCommand(const WiFiCommand* wifi_cmd, uint8_t* buffer,
                         size_t size);
size_t EncodeUserConfigCommand(UserConfigCommand_RequestType type,
                               const UserConfiguration* config_data,
                               uint8_t* buffer, size_t size);
 
size_t EncodeIrrigationCommand(const IrrigationCommand* irrigation_cmd,
                               uint8_t* buffer, size_t size);
 
size_t EncodePowerCommand(const PowerCommand* power_cmd, uint8_t* buffer,
                          size_t size);
 
size_t EncodeUserConfiguration(const UserConfiguration* config,
                               uint8_t* buffer);
 
int DecodeUserConfiguration(const uint8_t* data, const size_t len,
                            UserConfiguration* config);
 
#ifdef __cplusplus
}
#endif
 
#endif  // PROTO_C_INCLUDE_TRANSCODER_H_